Readers ask: How To Make A Rustic Wood Mantel?

How do you make a wooden mantle?

Instructions

  1. Cut the 10″ boards to the appropriate length.
  2. Use wood glue and finishing nails to attach the two boards together.
  3. Cut this board to the length of your mantel.
  4. Attach with wood glue and finishing nails.
  5. Cut a board to size to fill the gap on the bottom of the mantel.

How do you distress a wood mantle?

Rub the corners of the mantel with a fine-grit sandpaper or a piece of steel wool. Scuff off the paint in an irregular fashion so it resembles natural wear. Most natural aging occurs along the edges and any protrusions on the mantel, so focus the distressing in these locations.

What is a floating mantel?

As the name suggests, a floating mantel is a fireplace mantel that appears to be floating on your wall, usually above a fireplace. Floating wood mantels are typically hung at a height of 54 in. to 64 in.

What is the best wood to make a fireplace mantel?

Walnut is a popular choice for fireplace mantels. It is a harder and heavier type of wood than most and is extremely durable. The rich dark brown wood is an excellent for an impressive fireplace mantel. Hickory is also a great choice for a fireplace mantel if you are going for a unique look.

You might be interested:  Question: How To Make A Rope Ladder With Wooden Rungs?

How do you attach a mantel?

Slide Over Bolts Method

  1. Locate the studs behind the brick, stone, or faux veneer.
  2. Drive 1/2in lag screws through each of the studs.
  3. Have a helper support the mantel while you mark the location of the support rods on the back of the beam.
  4. Apply construction adhesive into the holes.
  5. Slide into place, admire, and enjoy!

How do you Antique a mantle?

The Steps:

  1. Prep. Tape up the area with painters tape.
  2. Apply the paint. If you choose to do two colors to achieve a bit of a contrasting look, paint the darker color first so that it’ll show through when you’re sanding.
  3. Sand and distress.
  4. Apply the finishing wax.
  5. Get creative with the antiquing wax.

Can you make a mantel out of pine?

Materials Needed for 6′ Box Mantel: 2 1x8x6 white pine boards. 1 1x8x8 white pine board (I had the store cut it down to a 1x8x6 for me and saved the excess for the end caps.) Chop saw. Wood glue.

How do you seal barn wood without changing color?

A water-based polyurethane finish will work great for sealing wood without altering the color. An acrylic lacquer is also a good option. All in all, it’s mostly a matter of personal preferences. But whichever of these products you choose, you want to look for a white-water one.

Leave a Reply

Your email address will not be published. Required fields are marked *