Quick Answer: How To Make Wood Look Rustic White?

Can I whitewash stained wood?

The whitewashing technique can be applied to stained or natural wood. Whether it’s oak, pine or another variety doesn’t matter. If you’re planning on staining before whitewashing, ensure the surface is smooth by lightly sanding it. If your wood has previously been stained or sealed, you’re good to go.

How do you whitewash wood with color?

The Best Way to Whitewash Wood

  1. Stain the wood (or leave it raw for a light finish).
  2. Mix 2 parts white paint (flat latex or matte acrylic both work fine) with 1 part water.
  3. Brush on the water/paint mixture in the direction of the wood grain.
  4. Use a clean rag to wipe off the paint in the direction of the wood grain.

How do you make paint look distressed?

More videos on YouTube

  1. Step 1) First Coat. Apply one coat of paint to your piece; let it dry completely.
  2. Step 2) Second Coat. If needed, apply a second coat in the same color to get the desired amount of coverage.
  3. Step 3) Distressing. Once your final paint coat is dry, you can start distressing it with fine-grit sandpaper.

How do you make something look distressed without sanding?

Directions on how to distress furniture without using a sander:

  1. Step 2 – Milk Paint. Once the chalk paint is dry, it takes about 30 minutes to an hour, it is time to mix up the milk paint.
  2. Step 3 – Antiquing Glaze. Now it is time to distressed!
  3. Step 4 – Light Antiquing Wax.
  4. Step 5 – Dark Antiquing Wax.
  5. 1 COMMENT.
You might be interested:  FAQ: Who Makes The Best Wood Router?

How do you make wood look weathered?

The trick to producing the look of weathered paint on new wood is to use two coats of different colored paints. Typically, the bottom coat is white or another light color—you can even use white paint primer. Then, a topcoat—often blue, red, or some other bold color—is added to the top and is partially removed.

Leave a Reply

Your email address will not be published. Required fields are marked *