Quick Answer: How To Make A Wooden Mantle Piece?

How do you make a wooden mantel?


  1. Cut the 10″ boards to the appropriate length.
  2. Use wood glue and finishing nails to attach the two boards together.
  3. Cut this board to the length of your mantel.
  4. Attach with wood glue and finishing nails.
  5. Cut a board to size to fill the gap on the bottom of the mantel.

How do you build a fireplace mantel from scratch?

Step by Step: Building Your Own Mantel from Scratch

  1. Step 1 – Sketching. Begin by sketching your design on a sheet paper.
  2. Step 2 – Legs.
  3. Step 3 – Breast Plate.
  4. Step 4 – Attach Molding.
  5. Step 5 – Install Mantel Shelf.
  6. Step 6 – Decorative Accents.
  7. Step 7 – Painting Your Mantel.

How do you build a fireplace mantel beam?


  1. Step 1: Cut 45• miter cuts at each end on two of your 1x8x6 boards.
  2. Step 2: Glue and nail the boards in place.
  3. Step 3: Measure and cut your end caps to size.
  4. Step 4: Distress your beam.
  5. Step 5: Fill the wood seam with wood putty.
  6. Step 6: Sand your beam.
You might be interested:  How Do You Make A Wooden Gate?

What kind of wood is used for mantles?

Walnut is a popular choice for fireplace mantels. It is a harder and heavier type of wood than most and is extremely durable. The rich dark brown wood is an excellent for an impressive fireplace mantel. Hickory is also a great choice for a fireplace mantel if you are going for a unique look.

How far should a mantle stick out?

The proportions of your mantel in relationship to your fireplace are important. Generally, your mantel should extend a minimum of three inches beyond the opening of your fireplace.

Can you make your own mantel?

Building a fireplace mantel is a great beginner building project that anyone can handle. You’ll need just a few supplies and tools to get the job done. This is also a budget project that you can do for just $50 and in a few hours time.

What is a floating mantel?

As the name suggests, a floating mantel is a fireplace mantel that appears to be floating on your wall, usually above a fireplace. Floating wood mantels are typically hung at a height of 54 in. to 64 in.

How wide should a mantle be?

Measure the length, height, and width of the firebox and facing. A mantel should extend a minimum of 3 inches beyond the firebox opening. For a quick reference, a 36-inch fireplace will probably have a mantel width of 48 inches. A 42-inch fireplace will probably have a mantel width of 54 inches.

How do you install a mantle?

Slide Over Bolts Method

  1. Locate the studs behind the brick, stone, or faux veneer.
  2. Drive 1/2in lag screws through each of the studs.
  3. Have a helper support the mantel while you mark the location of the support rods on the back of the beam.
  4. Apply construction adhesive into the holes.
  5. Slide into place, admire, and enjoy!
You might be interested:  FAQ: How To Make A Small Wooden Wheelbarrow?

How do you install a heavy wood mantel on a brick fireplace?

How to Install a Mantel

  1. Remove the old mantel.
  2. Add support by drilling holes for lag shields, then install lag bolts into the brick.
  3. Measure carefully and drill corresponding holes for the wood mantel.
  4. Push the wooden mantel carefully into place using wood glue for extra support.

Is a wood mantel safe?

What are the fire hazard safety clearance requirements for wood burning fireplace surrounds? Fireplace mantels by Design the Space constructed from wood – sometimes referred to as wooden fireplace mantel surrounds – are combustible and fire hazard clearances need to be maintained since safety is the primary concern.

Is Poplar good for a mantle?

In its natural state, poplar has green or brown streaks that can be easily painted to get your desired finish. Poplar is generally used for rustic fireplace appearances and resists swelling and shrinking. However, it needs considerable care since it is prone to swelling and shrinking.

Is Cedar good for a mantel?

Cedar Log. Cedar is a knotty softwood so it’s soft enough to work with easily but durable enough for a mantel shelf. Northern white cedar and aromatic red cedar is indigenous to North America and not endangered, so the wood is widely available in several forms suitable for mantel shelves.

Leave a Reply

Your email address will not be published. Required fields are marked *