Quick Answer: How To Make A Drywall Beam Look Like Wood?

How do you make drywall look like wood?

Buy semi-gloss latex paint in all three colors. Dip a medium/wide brush first into the main, or base color, then the dark, then the highlight. Brush the resulting paint onto the wall in long vertical strokes. Continue painting until the entire surface is covered with wood grain color streaks.

How do you make fake wooden beams?


  1. Prepare the ceiling to hold the faux beams by installing 2″x4″ boards or covering an LVL beam.
  2. Distress the wood to look old and worn.
  3. Cut the boards to length.
  4. Apply a finish to the wood. ( optional)
  5. Assemble the wood together to create the beam.
  6. Install the faux wood beam into your ceiling.

How do you cover a drywall beam?

Add joint compound, commonly called “ mud” in the drywall trade, at the inside and outside corners. While the mud is fresh and wet, embed lengths of corner bead on the outside corners on the lower edge of the beam. Crease and embed drywall tape at the inside corner where the beam meets the ceiling’s drywall.

You might be interested:  Readers ask: How To Make A Wood Stair Railing?

Is there a paint color that looks like wood?

Another paint color that looks like wood is Umber.

How do you make acrylic paint look like wood?

Mix the paint for your first layer: two parts white, one part brown, one part yellow. With your flat brush, apply this blend to the whole canvas with big, sweeping strokes. Now, add in horizontal strokes with all four colors. Use each color as-is, without mixing.

How do you cover wooden beams?

Flooring can be applied directly to the beam, just by laying enough pieces to cover it. Spread wood glue on the back of each piece, then tack it in place with finishing nails. Cut pieces as necessary to cover the whole beam.

What wood do you use for exposed beams?

Cedar is the most common species of wood used for beams, but is not the only option for getting that grainy, barn-like feel. Oak, maple and even elm wood (all hard woods) can be used to create these faux beams, along with Douglas fir, redwood or hemlock (all soft woods).

Should I paint my dark beams?

Black beams with a wood ceiling will camouflage any imperfections on your ceiling while accentuating the intricate architectural designs. Because a brightly painted ceiling can make your home feel like a hospital, painting those exposed beams in black will create a bohemian look.

Are wood beams in style?

Ceiling beams are a popular home decor element in many homes today. They largely stem from rustic designs; however, they can be incorporated with many design styles. Wooden beams can be added to contrast with a cold, clean look, or it can accentuate an already warm design style.

You might be interested:  Quick Answer: How To Make A Key Rack Out Of Wood?

Can you paint Styrofoam beams?

Paint: Acrylic paint is recommended for use on Styrofoam because it is often the most effective for sticking to Styrofoam. If you do choose to go with thicker paints, such as for wood, you should make sure the surface is sealed and primed to protect the foam.

How do you fill a gap between drywall and beam?

Filling the gaps to hide the flaws is a project almost any homeowner can tackle as a weekend or evening project.

  1. Lay a piece of thin cardboard on the drywall at the gap area and slide a straightedge against the beam.
  2. Insert backer rod into the gap where it is wider than 1/4 inch.

How do you cover an exposed beam?

Add faux beams out of real wood parallel to the existing beam to create an exposed beam ceiling. Cover 2-by-4s secured to ceiling joists; then cover the ceiling and beams with drywall material. Distress the drywall by hammering it in places and hitting it with a board that has several nails poking out the end.

How do you fill the gap between wood and drywall?

Consequently, you need to fill any gaps between wood paneling and drywall with a caulk that will allow the two different materials to expand or contract without creating unsightly cracks. Then you can cover the gap with joint compound and paper drywall tape.

Leave a Reply

Your email address will not be published. Required fields are marked *