Question: How To Make Wooden Hurricane Shutters?

What is the best wood to make exterior shutters?

Basswood is now the most popular wood for shutters, outpacing pine and poplar. These can be painted and stained, and are a light, flexible material that makes them good for a variety of designs. However, they’re not moisture resistant and they cost more than synthetic shutters.

What kind of plywood do you use for hurricane shutters?

Use CDX plywood at least 5/8 inch thick. Place plywood over window, allowing a 4-inch overlap on each side. Space bolts or screws 12 to 18 inches apart. Some people install homemade wood shutters by nailing plywood to the outside of window frames.

Can I install hurricane shutters myself?

Do-it-yourself hurricane shutters will fortify your condo or home. clear lexan storm panels will shield your home and can be self-installed. Simply enter your window measurements, get a price on your new hurricane shutters, and make your purchase. It’s that easy!

Can you use plywood for exterior shutters?

Be sure to purchase plywood that is 5/8 inch or greater, exterior grade (CDX). frame surrounding the window at least 1 ¾ inches. For larger windows, use 3/8 inch lag screws that penetrate the wall and frame surrounding the window at least 2 ½ inches.

You might be interested:  Question: How To Make A Wooden Screen Door?

Can you make shutters out of plywood?

Step 1: If you’re making your own shutters, your best choice is 5/8-inch exterior-grade plywood. For larger windows, use 3/8-inch lag screws that are 3-1/2 inches long. You want these to penetrate the frame at least 2-1/2 inches. For installation into masonry walls, it’s a bit more difficult.

How do you install hurricane shutters without a track?

For a direct-mount system, there are no tracks; instead you simply bolt the hurricane shutters directly to the house wall. With this system, threaded inserts are permanently set into the wall and then a machine screw is driven into each insert.

How do you stop wooden shutters from warping?

Exterior shutter material should be weather resistant and straight grained. These characteristics enable shutters to withstand warping, shrinking and swelling. Cedar is one of the wood species most commonly used for shutters. Redwood and cypress also are viable options.

How long do wooden shutters last?

Shutters can last anywhere from 10 to 20+ years, depending on what they are made of and how often they are used. Solid wood shutters are some of the most durable with faux wood shutters being a more economical but still durable alternative.

At what wind speed should you put up hurricane shutters?

Emergency Preparedness Director Tony Carper said most of Broward will see tropical storm force winds so homeowners should determine as best they can if their glass can withstand 60- to 70-mph winds.

Can 70 mph winds break windows?

The simple answer is yes. Hurricanes can produce extremely dangerous winds. A Category 5 storm can generate wind speeds of over 200 miles per hour. While steady wind may be unlikely to shatter a window, sudden, sharp gusts can add immense pressure to windows and doors and can break them.

You might be interested:  FAQ: How Do They Make Wood Pellets For Smokers?

Can OSB be used for hurricane shutters?

You can, of course, use thinner plywood, and plywood is recommended over oriented strand board (OSB) because it takes 30% thicker OSB to equal the impact resistance of plywood. IBHS recommends 5/8-inch thick plywood as a minimum unless you are having problems with handling the weight of the shutter.

Leave a Reply

Your email address will not be published. Required fields are marked *