- 1 What do you need to make a resin wood table?
- 2 How durable is a resin table top?
- 3 What type of resin is used for wood tables?
- 4 How thick should a resin table top be?
- 5 How do you seal wood before epoxy?
- 6 Do resin table tops scratch easily?
- 7 Does resin scratch easily?
- 8 How hard is it to epoxy a countertop?
- 9 How much does a resin table cost?
- 10 Why is epoxy resin so expensive?
- 11 Are epoxy tables heavy?
- 12 How do I calculate how much resin I need?
- 13 How thick should epoxy be on table top?
What do you need to make a resin wood table?
Step 1: What You’ll Need: Preparation and Materials
- GlassCast® 50 clear epoxy resin.
- Wood – English Yew – with a waney edge.
- Translucent Tinting Pigments- we used blue.
- Tape – flash/release and double-sided.
- Polypropylene Sheet.
- Polishing Compound and Oil (or similar)
- Tools – various.
How durable is a resin table top?
Resin is virtually indestructible. One of the most popular facts about resin table tops is that they are extremely durable. They are often coated in protective gloss during the manufacturing process which makes them more resistant to chips, cracks, scratches, and burns.
What type of resin is used for wood tables?
Epoxy resins are used to create high-gloss coatings for everything from wooden tabletops to bar counters. Talented DIYers also use them to create one-of-kind wooden art pieces, like river tables and elaborate wooden and epoxy sculptures.
How thick should a resin table top be?
Deep pour (low viscosity) epoxy resin will feel much thinner in nature and can be poured in layers of up to ½”-1” thick depending on the size of the mold. Tabletop (high viscosity) epoxy resin will be much thicker as you stir and pour and should only be poured in layers between ⅛-½” thick.
How do you seal wood before epoxy?
Before applying epoxy, sand smooth non-porous surfaces —thoroughly abrade the surface. 80-grit aluminum oxide paper will provide a good texture for the epoxy to “key” into. Be sure the surface to be bonded is solid. Remove any flaking, chalking, blistering, or old coating before sanding.
Do resin table tops scratch easily?
In particular, resin is sometimes used for countertops or tabletops. Though it is known for durability, it is possible to scratch a resin table. Very light scratches can often be sanded out, but for serious damage, you should fill in the scratch to restore the appearance of your table.
Does resin scratch easily?
Due to its makeup, resin is extremely low maintenance, and scratch removal is relatively simple. Resin has a nonporous surface that makes it resistant to stains and discoloration.
How hard is it to epoxy a countertop?
Epoxy is just a difficult material to work with, so preparation is key and experience is very helpful. But DIYers do it everyday, so if you’re up for the challenge, you can create not only durable and functional bathroom or kitchen countertops, but an original work of art you can enjoy every day.
How much does a resin table cost?
Well, depending on the size of the table, it can run you anywhere from $50 all the way to $2000. Most coffee or end tables will cost within the $50-$200 range, a desk will be roughly $200-$500, while most dining tables are going to be $500+.
Why is epoxy resin so expensive?
The manufacturing process of epoxy resin is one of the main reasons for its high price. First of all, the starting materials that are required to make epoxy resin are expensive. The cost of raw materials alone is about can go as high as $30 per gallon! Next, we have the actual manufacturing process of epoxy resin.
Are epoxy tables heavy?
The epoxy-wood bond, and epoxy itself, is at least as strong as the wood. In this case, Black Walnut, which is a very strong wood. So it doesn’t matter if your epoxy table is ½”, 1″, or 3″ thick.
How do I calculate how much resin I need?
To calculate volume in cubic inches: (radius squared) X pi (or, 3.14159265) x (desired epoxy coating thickness). Divide by 1.805 to convert cubic inch volume to US fluid ounces. To convert ounces to gallons, divide by 128.
How thick should epoxy be on table top?
The maximum depth to pour is approximately 1/8”- 1/4″ thick. If depths thicker than 1/8”- 1/4″ are desired, multiple coats are necessary. You must wait at least 4 to 10 hours between coats to allow sufficient curing and cooling.