- 1 How do you install reclaimed wood mantel?
- 2 What is the best wood to make a fireplace mantel out of?
- 3 What do you use to seal a wood mantel?
- 4 How far should a mantle stick out?
- 5 How do you remove a floating mantel?
- 6 How thick should a fireplace mantel be?
- 7 What is a floating mantel?
- 8 Is Poplar good for a mantle?
- 9 How do you build a fireplace mantel from scratch?
- 10 How do you float a mantel?
- 11 Should I polyurethane my mantel?
- 12 How do you seal barn wood without changing color?
How do you install reclaimed wood mantel?
Slide Over Bolts Method
- Locate the studs behind the brick, stone, or faux veneer.
- Drive 1/2in lag screws through each of the studs.
- Have a helper support the mantel while you mark the location of the support rods on the back of the beam.
- Apply construction adhesive into the holes.
- Slide into place, admire, and enjoy!
What is the best wood to make a fireplace mantel out of?
Walnut is a popular choice for fireplace mantels. It is a harder and heavier type of wood than most and is extremely durable. The rich dark brown wood is an excellent for an impressive fireplace mantel. Hickory is also a great choice for a fireplace mantel if you are going for a unique look.
What do you use to seal a wood mantel?
Prime the wood with either a clear or white primer. Apply the specific stain or color of paint you desire. Minwax Sanding Sealer is a good sealer to apply after a stain or color, though it will be quite slick looking. Seal whichever sealer you use with a coat of Minwax Polyurethane to ensure the mantel is protected.
How far should a mantle stick out?
The proportions of your mantel in relationship to your fireplace are important. Generally, your mantel should extend a minimum of three inches beyond the opening of your fireplace.
How do you remove a floating mantel?
Pound the bottom of the mantel shelf with a rubber mallet to separate it from the wall if it doesn’t release when you pry the base of the mantel away from the wall, advises Fireplace Town. Tap it gently, but with enough force to pull the nails from the wall. Once it’s loosened, pull out on the shelf to remove it.
How thick should a fireplace mantel be?
A depth of 7 inches is ideal for most mantels, as it allows plenty of room to accommodate decorative objects. Keep in mind that the top and the sides of the mantel should be the same depth.
What is a floating mantel?
As the name suggests, a floating mantel is a fireplace mantel that appears to be floating on your wall, usually above a fireplace. Floating wood mantels are typically hung at a height of 54 in. to 64 in.
Is Poplar good for a mantle?
In its natural state, poplar has green or brown streaks that can be easily painted to get your desired finish. Poplar is generally used for rustic fireplace appearances and resists swelling and shrinking. However, it needs considerable care since it is prone to swelling and shrinking.
How do you build a fireplace mantel from scratch?
Step by Step: Building Your Own Mantel from Scratch
- Step 1 – Sketching. Begin by sketching your design on a sheet paper.
- Step 2 – Legs.
- Step 3 – Breast Plate.
- Step 4 – Attach Molding.
- Step 5 – Install Mantel Shelf.
- Step 6 – Decorative Accents.
- Step 7 – Painting Your Mantel.
How do you float a mantel?
Make sure those marks are level, centered and extend far enough to cover the mantel’s length.
- drill holes at each mark. Drill Sleeve Holes.
- insert lead sleeves into holes. Insert Sleeves.
- drive lag bolts. Drive Lag Bolts.
- Drill Mantel Holes. Mark on the rear of the mantel where the lag bolts will hit.
- install the mantle.
Should I polyurethane my mantel?
Three coats of polyurethane should be adequate for your mantel because this surface is not likely to receive a great deal of wear. If a thicker coat is desired, apply a fourth coat of polyurethane to the wood.
How do you seal barn wood without changing color?
A water-based polyurethane finish will work great for sealing wood without altering the color. An acrylic lacquer is also a good option. All in all, it’s mostly a matter of personal preferences. But whichever of these products you choose, you want to look for a white-water one.