- 1 What is the cheapest way to cover a patio?
- 2 Can I build my own patio cover?
- 3 How much does it cost to build a wood patio cover?
- 4 What is the best wood to use for a patio cover?
- 5 How can I cover my patio with a tarp?
- 6 What should I cover my patio with?
- 7 Do I need a permit to build a patio cover?
- 8 Do patio covers increase home value?
- 9 Is Alumawood cheaper than wood?
- 10 How much does a 10×10 patio cover cost?
- 11 What wood lasts the longest outdoors?
- 12 How far apart should patio posts be?
What is the cheapest way to cover a patio?
3 Inexpensive Ways to Cover Concrete Patio
- #1: Buy a Shade Sail or Shade Cloth.
- #2: Wood Frame with Translucent Cover.
- #3: Build a Palapa.
- Build a Concrete Patio Cover That You Love.
Can I build my own patio cover?
A DIY Patio Cover can be easier than you imagine. There are many possibilities to plan and build a patio cover; every area is uniquely different.
How much does it cost to build a wood patio cover?
Wood patio covers cost about $10,000. Installation costs range from $7,000 – $13,000. Designing a wood patio cover requires blueprints or drawings for construction unlike vinyl or aluminum which come pre-built. Blueprints for a wood patio cover averages around $1650 while the cost of an engineer will add another $1500.
What is the best wood to use for a patio cover?
The quality of the wood and the advice generally is better, he says.) For most patio covers, Ming recommends Douglas fir, which can be ordered smooth or rough-sawn. Fir needs to be painted or stained to match the wood trim on the house, he said, but is considerably less expensive than redwood or cedar.
How can I cover my patio with a tarp?
Adding a tarpaulin, or tarp, over a patio is as simple as using a few grommets, eye-bolt screws and cord. The tarp can extend from the house’s eaves to a nearby fence to cover the patio. As long as the tarp is lashed tightly, so wind can’t tear its grommets, your patio shade will last at least one season.
What should I cover my patio with?
So go ahead and discover these fourteen stylish patio cover ideas that will keep you cool all summer.
- Top With an Enclosed Skylight.
- Buy Partially Shaded Furniture.
- Construct a Pavillion.
- Install Galvanized Steel Panels.
- Build a Pergola.
- Hang Curtains Around a Pergola.
- Stretch a Tarp.
- Make Use of Trees.
Do I need a permit to build a patio cover?
A permit is required for building patio covers. Building a patio cover can be done without a permit, in theory. However, homeowners can incur fees if cited by the city during the build. Homeowners can often run into issues when reselling their home, or worse, if a structure fails.
Do patio covers increase home value?
A dining area, dry laid patio, a patch of gravel, a covered patio or an above-grade deck: According to SmartMoney.com, a landscaped patio raises the value of your home by 12.4 percent.
Is Alumawood cheaper than wood?
Alumawood typically cost about 25% more than wood, but will last longer and has less maintenance.
How much does a 10×10 patio cover cost?
A solid 10 x 10 patio cover made out of standard wood can cost between $7,000 and $14,000. A wooden lattice patio cover can cost anywhere from $4,500 to $7,000, which is less costly initially but is more likely to require repairs over time.
What wood lasts the longest outdoors?
So Which Wood Type Lasts the Longest Outdoors? The general consensus is for hardwoods, such as ipe and teak. Since these species are extremely rot-resistant and durable, they have the best chance at a long life outdoors. These hardwoods are very durable and can last decades with minimal maintenance.
How far apart should patio posts be?
In general, posts should be spaced no more than 8 feet apart. Some builders position them every 4 feet for a completely rigid frame. The maximum distance between footings is determined by the size of your joist material.