How To Make Faux Wood Beams?

How do you make faux wood beams out of Styrofoam?

These sheets are 4-by-8 feet, and just a few of them can create enough beams for the entire room.

  1. Cut the insulation sheets into boards.
  2. Glue the boards together with foam glue.
  3. Allow the glue to completely dry.
  4. You are simulating the appearance of wood grain.
  5. Paint the beams dark brown with acrylic paint.

How do I make my ceiling beam look like wood?

Paint the beams with the base color of primer/paint using either a roller or brush. If desired, use a roller for speedier painting of the horizontal areas and a brush on the vertical portions, which will ensure that the paint reaches the edges along the ceiling as well. Allow the primer/paint to dry completely.

How much does it cost for a faux wood beam?

The national average materials cost to install decorative beams is $7.49 per linear foot, with a range between $6.72 to $8.26. The total price for labor and materials per linear foot is $18.13, coming in between $15.12 to $21.14.

How do you cover exposed ceiling beams?

Add faux beams out of real wood parallel to the existing beam to create an exposed beam ceiling. Cover 2-by-4s secured to ceiling joists; then cover the ceiling and beams with drywall material. Distress the drywall by hammering it in places and hitting it with a board that has several nails poking out the end.

You might be interested:  Readers ask: Do Wood Stoves Make Carbon Monoxide?

Can you paint Styrofoam beams?

Paint: Acrylic paint is recommended for use on Styrofoam because it is often the most effective for sticking to Styrofoam. If you do choose to go with thicker paints, such as for wood, you should make sure the surface is sealed and primed to protect the foam.

Can you paint Styrofoam ceiling beams?

Styrofoam ceiling tiles require a specific type of paint that won’t melt or flake. Latex-based or water-based acrylics are the only two kinds you should consider as they don’t contain chemicals that can damage the tiles. You’ll need a roller to apply both the paint and primer as well as a nylon brush for touch-ups.

How do you fake beam a ceiling?


  1. Prepare the ceiling to hold the faux beams by installing 2″x4″ boards or covering an LVL beam.
  2. Distress the wood to look old and worn.
  3. Cut the boards to length.
  4. Apply a finish to the wood. ( optional)
  5. Assemble the wood together to create the beam.
  6. Install the faux wood beam into your ceiling.

Is there a paint color that looks like wood?

Another paint color that looks like wood is Umber.

Do faux wood beams look real?

What are Faux Wood Beams? Usually manufactured with high-density polyurethane, faux beams are made to look just like the real thing. They are widely obtainable and available in hundreds of styles and textures. They also are lightweight, which makes them easier to install than true wood beams.

Can you paint faux wood beams?

So both Timber and Sandblasted will need to be primed before painting or staining them. We recommend a water-based primer such as Benjamin Moore’s “Fresh Start®” 100% acrylic all-purpose primer. The rest of our unstained beams arrive pre-primed in a pale tan / peanut color, ready to accept paint or stain.

Leave a Reply

Your email address will not be published. Required fields are marked *