- 1 Is it cheaper to buy or build a bookshelf?
- 2 How do you make a homemade bookshelf?
- 3 How do you make a cheap bookshelf?
- 4 How thick should wood be for shelves?
- 5 Is it easy to build a bookcase?
- 6 How do you make a cheap bookshelf sturdy?
- 7 What do I need to build a bookshelf?
- 8 What wood is best for making shelves?
- 9 How far can a shelf span without support?
- 10 What type of wood should I use for shelves?
Is it cheaper to buy or build a bookshelf?
When you’re comparing DIY furniture to furniture from other stores that is built to last, there is almost no competition: DIY will be cheaper 99% of the time. Sometimes making your own furniture will save you 70, 80, or 90% compared to buying it from the store.
How do you make a homemade bookshelf?
How to Build a Bookshelf in 8 Steps
- Step 1: Cut the Legs, Shelves, and Supports. Photo by Kolin Smith.
- Step 2: Attach the Supports to the Legs.
- Step 3: Assemble the Box.
- Step 4: Level the Bookcase.
- Step 5: Plumb the Bookshelf.
- Step 6: Attach the Kick Board.
- Step 7: Scribe the Trim to Fit.
- Step 8: Apply Nosing to Shelf Faces.
How do you make a cheap bookshelf?
Cheap Bookshelves Ideas
- Use simple box to store knowledge.
- One strap of leather and a plank can shine.
- Sculpt a bookshelves with drawers.
- Reshape a plane bookshelves with wooden textures.
- Scale wooden boxes into a timeless piece.
- Plant crown molding on simple bookshelves.
- Pick the right pattern to emphasize your library.
How thick should wood be for shelves?
Thick Wood Bookshelves Use 3/4-inch thick materials for shelves and bookcase structure. If you’re using hardwood solids, it’s OK to boost the thickness to 1 1/4 inch for almost unlimited support. This type of shelf looks more like a mantel and is expensive, but adds the opulent look of craftsmanship.
Is it easy to build a bookcase?
Once you have the lumber, building a bookshelf is a fairly simple woodworking project that you can get done in just a day or two. It’s a low-cost project as well and since the plan is free, you don’t have to worry about busting through your budget.
How do you make a cheap bookshelf sturdy?
Cut a piece of 1/8-inch plywood or hardboard to the dimensions you measured, using a circular saw. Set the backing in place. Square the case again and nail the backing to the bookcase with 1-inch finish nails. Drive a few nails into each shelf for added stability.
What do I need to build a bookshelf?
Materials Needed to Build Freestanding Bookshelf:
- 1 sheet ¾″ plywood.
- 1 sheet ¼″ plywood.
- (5) 1x3x8.
- (2) 1x2x8.
- Crown molding (8 ft stick is plenty)
- Cove molding (Four 8ft sticks)
- 4 cabinet feet (I used part #4003 from Osborne Wood)
- 1 ¼″ pocket hole screws.
What wood is best for making shelves?
The Best Wood to Use for Wood Shelves
- Pine. Pine is one of the most affordable and popular softwoods in the market.
- Plywood. Plywood is another good option for people who are interested in making their own shelves.
- Cherry. Although cherry is a hardwood, it is lightweight and easy to use.
- Red Oak.
How far can a shelf span without support?
The span limit is defined as the maximum distance apart that you can place the shelving supports. Glass, particleboard, solid lumber, plywood, and other common shelving materials can have span limits that can range from 18 inches to almost 5 feet.
What type of wood should I use for shelves?
If you are making shelves where the color and grain of the wood is an important part of the design, look for oak, maple, or cherry plywood —these options will still offer durability, but will help keep costs down compared to with non-manufactured hardwoods of the same species.