How To Make A Reclaimed Wood Mantel?

How do you build a reclaimed wood mantel?

How to Build a DIY Floating Mantel out of Barn Wood

  1. Materials:
  2. Step One: Smooth surface of wood.
  3. Step Two: Trim end of wood.
  4. Step Three: Rout a channel in barn wood.
  5. Step Four: Attach flange to wall.
  6. Step Five: Drill holes in back of wood and determine placement.
  7. Step Six: Set mantel into place and secure.

What is the best wood to use for a fireplace mantel?

Walnut is a popular choice for fireplace mantels. It is a harder and heavier type of wood than most and is extremely durable. The rich dark brown wood is an excellent for an impressive fireplace mantel. Hickory is also a great choice for a fireplace mantel if you are going for a unique look.

How do you make a wooden mantle?


  1. Cut the 10″ boards to the appropriate length.
  2. Use wood glue and finishing nails to attach the two boards together.
  3. Cut this board to the length of your mantel.
  4. Attach with wood glue and finishing nails.
  5. Cut a board to size to fill the gap on the bottom of the mantel.

Can you make a mantel out of pine?

Materials Needed for 6′ Box Mantel: 2 1x8x6 white pine boards. 1 1x8x8 white pine board (I had the store cut it down to a 1x8x6 for me and saved the excess for the end caps.) Chop saw. Wood glue.

You might be interested:  Question: How To Make A Wooden Heart Out Of Pallets?

How thick should a wood mantel be?

A depth of 7 inches is ideal for most mantels, as it allows plenty of room to accommodate decorative objects. Keep in mind that the top and the sides of the mantel should be the same depth.

How far should a mantle stick out?

The proportions of your mantel in relationship to your fireplace are important. Generally, your mantel should extend a minimum of three inches beyond the opening of your fireplace.

What is code for a fireplace mantel?

The National Fire Code dictates that any combustible material (e.g., wood mantel or similar trim) must be at least six inches from the firebox opening. An additional inch of clearance is needed for every 1/8 inch the combustible material or trim protrudes.

What is a floating mantel?

As the name suggests, a floating mantel is a fireplace mantel that appears to be floating on your wall, usually above a fireplace. Floating wood mantels are typically hung at a height of 54 in. to 64 in.

How do you install a floating mantel?

How to Install a Mantel

  1. Remove the old mantel.
  2. Add support by drilling holes for lag shields, then install lag bolts into the brick.
  3. Measure carefully and drill corresponding holes for the wood mantel.
  4. Push the wooden mantel carefully into place using wood glue for extra support.

How do I replace my mantle?

Here’s how to replace your fireplace mantel in a few easy steps.

  1. Step 1 – Remove the Old Fireplace Mantel.
  2. Step 2 – Measure.
  3. Step 3 – Purchase a New Fireplace Mantel.
  4. Step 4 – Attach the Support Ledger.
  5. Step 5 – Prepare the New Mantel.
  6. Step 6 – Attach the Mantel to the Support Ledger Board.
  7. Step 7 – Secure the Mantel.

Leave a Reply

Your email address will not be published. Required fields are marked *