FAQ: How To Make Secret Wood Pendant?

How do you make resin pendants?

How to make resin pendants

  1. Choose a pendant blank that is deep enough to hold the resin in place until it sets.
  2. Mix your resin, hardener, and resin colour of your choice.
  3. Want a little extra something?
  4. Once thoroughly mixed, slowly pour it into the pendant blank.
  5. Leave to cure.

What is a secret wood pendant?

Each pendant is made with a combination of durable 925 sterling silver for the base and geometric wood and resin form for the turtle shell. Powerful magnets are integrated in the design and connect the shell with the base.

How do you combine wood and resin?

Once you have an idea of where you want to place the wood, remove it from the mold and mix up approximately 1 1/2 ounces of resin (based upon this size mold and the amount of wood I used). Pour it into the bottom of the mold and make sure it covers the whole surface.

How do you polish a wooden necklace?

Use a non-abrasive microfiber cloth to wipe down the surface of your wood jewelry daily to avoid dust and dirt buildup. Use a Blitz wood polishing cloth with natural beeswax to polish the surface of your wood jewelry. You should only need to polish once a month or as needed.

You might be interested:  Readers ask: How To Make A Recorder Out Of Wood?

How do you make resin molds pendants?

How to Make Resin Jewelry

  1. Step 1: Gather the Supplies You’ll Need to Make Resin Jewelry.
  2. Step 2: Prep Your Bezels/Molds and Decorative Items.
  3. Step 3: Mix the Resin.
  4. Step 4: Pour the First Layer of Resin.
  5. Step 5: Add Your Decorative Item to the Resin.
  6. Step 6: Repeat With Further Layers of Resin.
  7. Step 7: Remove from the Molds.

Is resin poisonous?

Epoxy and resin can be poisonous if they are swallowed or their fumes are breathed in.

What was in the wood necklace?

On their one year anniversary, Terry gave his girlfriend Anna a necklace that he’d made himself. It was made out of Huon pine – a wood native to Tasmania – but little did Anna know there was something much more precious inside. The necklace contained a hidden engagement ring.

How do you prepare wood for resin jewelry?

PREP: The first thing you want to do is fit your wood pieces into molds that you want to use, and spray those sections of your jewelry mold with the Mold Release Conditioner Spray. Let Dry. You also need to seal the wood pieces by coating them entirely in Ultra Seal and letting them dry.

Do you need to seal wood before epoxy?

The Epoxy Resin sinks into the Wood For any porous surfaces such as wood, it is particularly important to seal the surface first. You do not need a separate product for this, rather you can simply apply a thin layer of resin to the wood and let it cure.

Leave a Reply

Your email address will not be published. Required fields are marked *